Make | FRITZ WERNER |
Type of machine | FPH1V1 |
Year of manufacture | 1980 |
Machine's weight | 38 |
x-travel | 1000 |
y-travel | 350 |
z-travel | 140 |
Total power requirement | 11 |
x-travel: 1000 mm
y-travel: 350 mm
z-travel: 140 mm
total power requirement: 11 kW
weight of the machine ca: 38 t
Table size 355 x 1,500 mm
Table travel, longitudinal, manual / motor-driven 1,000 mm
Milling slide travel, vertical, manual / motor-driven 350 / 330 mm
Mounting height between table and middle of milling spindle
50 - 400 mm
18 table feeds, longitudinal 16 - 1,600 mm
21 milling slide feeds, vertical 4 - 400 mm/min
Table quick feed 4,000 mm/min
Max. load on table, approx. 600 kg
Spindle taper SK 50
12 Spindle speeds 35.5 - 1,800 rpm
Milling spindle, quill adjustment, approx. 140 mm
Spindle drive 7,5 kW
Total electrical load, approx. 11 kW - 380 V - 50 Hz
Weight, approx. 3,800 kg
Accessories / Special Features
Plug board control for programming approx. 30 working steps in succession. Table travel as well as movement of milling slide are limited by a cam switch.
Hydraulic quill lifting approx. 0.5 to 3 mm.
Horizontal counter bracket with outer bearing.
Coolant equipment, built-on.
Large water collection tray on the table.
Swivelling control panel.
Condition : Good. Machine can be inspected under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Thank you for your interest.
We have more than 50 milling machines on stock. Please let us know your requirements.