CONTROLS
PLC SIEMENS S5 & S7
PRESS DESIGN
drive system: hydraulic
frame design: H-frame, monoblock
quick die change system: yes
feedstock transport direction: left to right
SLIDE
total force (nominal): 1400 to
stroke: 340 mm
SLIDE (HYDR. PRESS)
approximation velocity max.: 100 mm/s
working velocity min.: 5 mm/s
working velocity max.: 40 mm/s
return velocity max.: 120 mm/s
COUNTER RAM
nominal force: 350 to
stroke: 50 mm
V-RING
nominal force: 700 to
stroke: 50 mm
TOOL DIMENSIONS
lower table (left-right): 1270 mm
lower table (front-back): 1800 mm
upper table (left-right): 1200 mm
upper table (front-back): 1200 mm
tool width max.: 1150 mm
tool depth max.: 1150 mm
shut height max.: 940 mm
tool weight max.: 6000 kg
OVERALL SPECIFICATIONS (COIL LINES)
sheet width max: 650 mm
sheet thickness max: 18 mm
max. weight of coil: 7.5 to
feed velocity max.: 10 m/min
feedstock transport direction: left to right
COIL CHAIR
max. weight of coil: 7.5 to
DECOILER
design: single reel
sheet width max: 100 mm
sheet width (min): 650 mm
max. weight of coil: 7.5 to
max. diameter of coil: 2000 mm
mandrel expansion range from: 470 mm
mandrel expansion range up to: 530 mm
LEVELLER UNIT
sheet width max: 650 mm
sheet width (min): 100 mm
sheet thickness max: 16 mm
sheet thickness (min): 2 mm
number of leveller rolls: 8
diameter of leveller rolls: 127 mm
distance between leveller rolls: 134 mm
diameter of feed rolls: 160 mm
feed velocity min.: 1 m/min
feed velocity max.: 10 m/min
loop controls: yes
LEVELLER UNIT
sheet width max: 500 mm
sheet width (min): 50 mm
number of leveller rolls: 21
diameter of leveller rolls: 56 mm
diameter of feed rolls: 150 mm
feed velocity max.: 15 m/min
STRIP-FEEDER
feeder type: roll feeder
sheet width max: 630 mm
sheet thickness max: 20 mm
feeding step max.: 999.9 mm
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
mains frequency: 50 Hz
Coil line SCHULER, consisting of:
- coil chair
- coil reel SCHULER HES 12-850
- straightener SCHULER RM 8-125/160-0650 (650x16 mm)
- additional leveller ARKU 21 rolls (500x 6 mm)
Sold 
