PRESS DESIGN
drive system: servomechanic
frame design: H-frame, tie rod
openings in uprights: yes
number of suspensions: 2
number of slide actions: 1
feedstock transport direction: left to right
PRESS FORCES
total force (nominal): 630 to
nominal work capacity: 125 kNm
PRESS TABLE
table surface (left-right): 4000 mm
table surface (front-back): 1800 mm
SLIDE
slide force: 630 to
table surface (left-right): 4000 mm
table surface (front-back): 1700 mm
stroke: 400 mm
stroke rate (max.): 60 /min
SLIDE (MECHAN. PRESS)
slide adjustment: 300 mm
stroke min.: 80 mm
stroke max.: 400 mm
stroke rate (min.): 3 /min
stroke rate (max.): 60 /min
TOOL ASSEMBLY DIMENSIONS
shut height (stroke down, adjustment up), BDC: 1000 mm
distance between columns (H-frame): 4170 mm
passline opening (free passage in side columns): 1800 mm
free passage between side columns (height): 1600 mm
OVERALL SPECIFICATIONS (COIL LINES)
sheet width max: 1300 mm
max. weight of coil: 14.5 to
feed velocity max.: 40 m/min
feedstock transport direction: left to right
COIL CHAIR
stroke: 630 mm
DECOILER
design: single reel
sheet width max: 1300 mm
sheet width (min): 80 mm
max. diameter of coil: 1800 mm
mandrel expansion range from: 470 mm
mandrel expansion range up to: 530 mm
movement: 2700 mm
LEVELLER UNIT
sheet thickness max: 5 mm
material cross section max. (450 N/mm2): 2150 mm²
number of leveller rolls: 9
diameter of leveller rolls: 70 mm
distance between leveller rolls: 76 mm
number of infeed-/outfeed rolls: 2
diameter of feed rolls: 160 mm
loop controls: yes
STRIP-FEEDER
feeder type: roll feeder
sheet width max: 130 mm
feeding step max.: 600 mm
speed (max): 2 m/min
band support rolls: yes
TRANSFER SYSTEM
distance between tools, stroke X max.: 800 mm
distance between tools, stroke X min.: 0 mm
stroke Y max.: 500 mm
stroke Y min.: 0 mm
stroke Z max.: 200 mm
stroke Z min.: 0 mm
Inner width clamping rails closed min.: 400 mm
Inner width clamping rails open max.: 1400 mm
distance press table - transfer rail min.: 560 mm
ELECTRICAL SPECIFICATIONS
mains power supply: 350 kVA
mains voltage: 400 V
mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
total weight approx.: 148000 kg
ATTACHMENTS (PRESSES)
autom. tool clamping device: yes
decoiler: yes
leveller unit: yes
strip feeder: yes
feeder type: roll feeder
gripper transfer system: yes
noise protection cabin: yes
vibration damping elements: 4
European CE standards: yes
Tool weight, total max. 17000 kg
Tool weight, upper part max. 8000 kg
Coil reel SCHULER AC-UHL-220-1300
Leveller SCHULER AC-SH-9-70/160-1300
Serve-feed SCHULER AC-M-EHP-1300 POWERFEED
3D Servo-Transfer SCHULER AT2-M-800-500-200
Sold 
