К сожалению данное оборудование продано, свяжитесь с нашим менеджером и он подберёт Вам то, что Вы ищите. 
| Тип: | Эксцентриковый пресс - одностоечный |
| Производитель: | SANGIACOMO |
| Год выпуска: | 2002 |
| Модель/Тип: | T-130 RCE |
| Состояние: | Бу |
| Наработка: | h |
| Реферальный номер: | p179734 |
| Press Design | ||
|---|---|---|
| drive system: eccentric / crank | ||
| frame design: C-frame, single sided | ||
| number of suspensions: | 1 | |
| opening in table: yes | ||
| Press forces | ||
|---|---|---|
| total force (nominal): | 130 | to |
| Press Table | ||
|---|---|---|
| table surface (left-right): | 1200 | mm |
| table surface (front-back): | 700 | mm |
| height above floor level: | 900 | mm |
| opening in bed (left-right): | 300 | mm |
| opening in bed (front-back): | 210 | mm |
| Slide | ||
|---|---|---|
| table surface (left-right): | 730 | mm |
| table surface (front-back): | 530 | mm |
| spigot hole diameter: | 50 | mm |
| stroke rate (max.): | 55 | /min |
| slide (mechan. Press) | ||
|---|---|---|
| slide adjustment: | 100 | mm |
| autom. Slide adjustment: yes | ||
| stroke min.: | 16 | mm |
| stroke max.: | 200 | mm |
| hydraulic overload protection: yes | ||
| Tool Assembly Dimensions | ||
|---|---|---|
| throat (C-frame): | 350 | mm |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 1500 | mm |
| space requirements -front/back-: | 2200 | mm |
| total height: | 3500 | mm |
| total weight approx.: | 8500 | kg |
| Attachments (presses) | ||
|---|---|---|
| 2-hand engagement: yes | ||
| foot engagement: yes | ||
| acc. to actual accident protection regulation: yes | ||
| The Ompi clutch-brake combination is replaced, renewed. The control with Siemens panel is renewed by owner (original Sangiacomo control). The cabling of the machines is completely renewed. The protective housing of the tool room is renewed. Afterwards test run in all functions, new safety condition (UVV - Germany). 6 months warranty (single shift operation) on new parts installed by the owner. Prerequisite is proper handling of the machine + approved use. Damaged new parts will be replaced by the owner after an examination of the facts, in justified cases, excluding installation costs. The press has compensation cylinders and central oil lubrication |
