бу Станки и оборудование

Инструмент, оснастка

Cookies помогают нам в предоставлении наших услуг. Пользуясь нашими сервисами, вы соглашаетесь с тем, что мы используем файлы cookie.
Sold К сожалению данное оборудование продано, свяжитесь с нашим менеджером и он подберёт Вам то, что Вы ищите.

Пресс для литьевого прессования MÜLLER WEINGARTEN HUQ 630-30 , г.в. 1997

"Пресс для литьевого прессования MÜLLER WEINGARTEN HUQ 630-30 , г.в. 1997"

Объявление # P0122032
Тип: Пресс для литьевого прессования
Производитель: MÜLLER WEINGARTEN
Год выпуска: 1997
Модель/Тип: HUQ 630-30
Состояние: Бу
Наработка: h
Реферальный номер: p122709
  • ID: P0122032
  • 1002
  • 2021-03-23
  • Цена
  • по запросу
Связаться через Telegram Telegram
Связаться через WhatsApp WhatsApp


PRESS DESIGN
  drive system: eccentric / crank
  frame design: H-frame, monoblock
  openings in uprights: yes
  number of suspensions: 2
  number of slide actions: 1
  slide ejectors / cushion: no
  table cushion: no
  opening in table: yes
  quick die change system: yes
  feedstock transport direction: left to right

PRESS FORCES
  total force (nominal): 630 to

PRESS TABLE
  table surface (left-right): 3000 mm
  table surface (front-back): 1600 mm
  thickness of bolster plate: 200 mm
  opening in bed (left-right): 2070 mm
  opening in bed (front-back): 630 mm
  number of T-slots: 10

SLIDE
  slide force: 630 to
  table surface (left-right): 3140 mm
  table surface (front-back): 1600 mm
  stroke: 400 mm
  stroke rate (max.): 80 /min
  autom. tool clamping device: yes

SLIDE (MECHAN. PRESS)
  slide adjustment: 200 mm
  stroke adjustment: yes
  stroke min.: 71 mm
  stroke max.: 400 mm
  variable speed: yes
  stroke rate (min.): 15 /min
  stroke rate (max.): 80 /min
  hydraulic overload protection: yes
  main drive power: 98 kW

TOOL ASSEMBLY DIMENSIONS
  shut height (stroke down, adjustment up), BDC: 700 mm
  shut height (stroke down, adjustment up), BDC: 500 mm
  passline opening (free passage in side columns): 1400 mm
  free passage between side columns (height): 650 mm
  distance between columns (H-frame): 3180 mm

OVERALL SPECIFICATIONS (COIL LINES)
  sheet width max: 1300 mm
  sheet thickness max: 4 mm
  max. weight of coil: 15 to
  feedstock transport direction: left to right

COIL CHAIR
  max. weight of coil: 15 to

DECOILER
  design: single reel
  sheet width max: 1300 mm
  max. diameter of coil: 2000 mm

LEVELLER UNIT
  sheet width max: 1300 mm
  material cross section max. (450 N/mm2): 2400 mm²
  number of leveller rolls: 9

STRIP-FEEDER
  feeder type: roll feeder
  sheet width max: 1300 mm
  sheet thickness max: 4 mm
  feeding step min.: 1 mm
  feeding step max.: 1500 mm

DIMENSIONS / WEIGHTS
  height above floor level: 7000 mm
  height under floor level: 3000 mm
  total weight approx.: 105000 kg

ATTACHMENTS (PRESSES)
  European CE standards: yes


- max weight of lower tool         15'000 kg
- 2 rail-mounted tool change carts in tandem design incl. adapter plates
  Follow-on tool can be pre-fitted.
- small crack in crown, repairable. Repair offer available
Поставляем бу станки, оборудование
Заказ