Пресс для литьевого прессования SCHULER MSD2-630-4 , г.в. 2012

PRESS DESIGN
  drive system: servomechanic
  frame design: H-frame, tie rod
  openings in uprights: yes
  number of suspensions: 2
  number of slide actions: 1
  feedstock transport direction: left to right

PRESS FORCES
  total force (nominal): 630 to
  nominal work capacity: 125 kNm

PRESS TABLE
  table surface (left-right): 4000 mm
  table surface (front-back): 1800 mm

SLIDE
  slide force: 630 to
  table surface (left-right): 4000 mm
  table surface (front-back): 1700 mm
  stroke: 400 mm
  stroke rate (max.): 60 /min

SLIDE (MECHAN. PRESS)
  slide adjustment: 300 mm
  stroke min.: 80 mm
  stroke max.: 400 mm
  stroke rate (min.): 3 /min
  stroke rate (max.): 60 /min

TOOL ASSEMBLY DIMENSIONS
  shut height (stroke down, adjustment up), BDC: 1000 mm
  distance between columns (H-frame): 4170 mm
  passline opening (free passage in side columns): 1800 mm
  free passage between side columns (height): 1600 mm

OVERALL SPECIFICATIONS (COIL LINES)
  sheet width max: 1300 mm
  max. weight of coil: 14.5 to
  feed velocity max.: 40 m/min
  feedstock transport direction: left to right

COIL CHAIR
  stroke: 630 mm

DECOILER
  design: single reel
  sheet width max: 1300 mm
  sheet width (min): 80 mm
  max. diameter of coil: 1800 mm
  mandrel expansion range from: 470 mm
  mandrel expansion range up to: 530 mm
  movement: 2700 mm

LEVELLER UNIT
  sheet thickness max: 5 mm
  material cross section max. (450 N/mm2): 2150 mm²
  number of leveller rolls: 9
  diameter of leveller rolls: 70 mm
  distance between leveller rolls: 76 mm
  number of infeed-/outfeed rolls: 2
  diameter of feed rolls: 160 mm
  loop controls: yes

STRIP-FEEDER
  feeder type: roll feeder
  sheet width max: 130 mm
  feeding step max.: 600 mm
  speed (max): 2 m/min
  band support rolls: yes

TRANSFER SYSTEM
  distance between tools, stroke X max.: 800 mm
  distance between tools, stroke X min.: 0 mm
  stroke Y max.: 500 mm
  stroke Y min.: 0 mm
  stroke Z max.: 200 mm
  stroke Z min.: 0 mm
  Inner width clamping rails closed min.: 400 mm
  Inner width clamping rails open max.: 1400 mm
  distance press table - transfer rail min.: 560 mm

ELECTRICAL SPECIFICATIONS
  mains power supply: 350 kVA
  mains voltage: 400 V
  mains frequency: 50 Hz

DIMENSIONS / WEIGHTS
  total weight approx.: 148000 kg

ATTACHMENTS (PRESSES)
  autom. tool clamping device: yes
  decoiler: yes
  leveller unit: yes
  strip feeder: yes
  feeder type: roll feeder
  gripper transfer system: yes
  noise protection cabin: yes
  vibration damping elements: 4
  European CE standards: yes


Tool weight, total       max. 17000 kg
Tool weight, upper part  max.  8000 kg

Coil reel         SCHULER AC-UHL-220-1300
Leveller          SCHULER AC-SH-9-70/160-1300
Serve-feed        SCHULER AC-M-EHP-1300 POWERFEED
3D Servo-Transfer SCHULER AT2-M-800-500-200