Clean air extraction system
- NEW -
Factory wood power
Type RLA 160
Description:
- For wood shavings. Designed for commercial use.
- All clean air extraction systems of this series are dust-tested
To H3, residual dust content less than 0.1 mg / m³
- High suction capacity with low space requirement
- Maximum performance in this class
- Very quiet
- All models with a start-up protection
Application:
- Clean air extraction systems for wood chips
- Designed for commercial use
- For all woodworking machines with
Corresponding suction nozzle diameter
High-quality, well thought-out construction:
- Robust and compact housing made of galvanized steel
Steel sheet
- Exhaust connection easily from left to right
Convertible, thus flexible use
- Large inspection openings
- Large - dimensioned wheeled container with
Clamp and shaving bag
- System already delivered completely assembled,
Therefore quickly usable
- All models movable
Description of the filter:
- Ultra compact with maximum filter area
- filter material made of polyesterflies, alubedampft,
Washable and therefore with a long service life
- Filter standard in antistatic version
Tested and approved according to category M-BIA
- Filter resistance monitoring via differential pressure socket,
Adjustable with warning lamp on the control box
- The fan is connected downstream of the filter
Equipment details:
- All systems of this series are dust-tested according to H3,
Residual dust content below 0.1 mg / m³
- With a new arresting device for safe operation
Container positioning
Delivery:
- Metal blower wheel
- Inspection opening for cleaning the bypass filter
- Connection cable 5 m with CEE plug 5-pole and phase inverter
- 2 bock and 2 swivel castors with parking brake
- manual cleaning
Technical specifications:
Suction nozzle diameter 160 mm
Nominal volume flow 1448 m³ / h
Max. Flow rate 2400 m³ / h
Vacuum at Vnenn 2247 Pa
Filter area 9,21 m²
Filter material M
Residual dust content