Производитель | PFAUTER |
Модель | P 160 H |
Год выпуска | 1965 |
Масса станка | 4000 |
Мах. Модуль | 45 |
Максим. потребляемая мощность станка | 95 |
макс диаметр зубчатого колеса | 175 |
Ширина колеса | 355 |
Min модуль | |
Габариты | |
max wheel diameter: 175 mm
gear width: 355 mm
max module: 45
min module:
total power requirement: 95 kW
weight of the machine ca: 4000 kg
dimensions of the machine ca: m
P F A U T E R (Germany)
Horizontal Gear Hobber
Model P 160 H Serial No. 20 879
Original Year 1965 but reconditioned and modernized in 2003
_______________________________________________________
Max. workpiece Ø (depending on hob Ø) 160 / 175 mm
Module range up to 4.5
Hobbing length 355 mm
Minimum number of teeth 3
Max. length of workpiece/distance between centres 455 mm
Workspindle bore Ø 75 mm
Min./max. axis distance, hob / workpiece 30 / 138 mm
Hob carriage swivelling up to 120 °
Hob size Ø 115 x 105 mm
Hob shifting, manually approx.. 40 mm
Hob spindle speeds, infinitely variable 50 – 500 rpm
Feed range, axial, infinitely variable 0.25 – 10 mm/rev
Feed range, radial, infinitely variable 0 – 0,1 mm/rev
Hob spindle drive 5.5 kW
Total electrical load 9.5 kW - 380 V - 50 Hz
Weight approx.. 4,000 kg
Accessories / Special Features
Machine has been fully reconditioned and modernized in 2003 with a
SIEMENS PLC Control Model SPS 100 U and also equipped with a free
standing Co9ntrol Panel,Main drive and separated Infeed drive motors
were renewed, and machine can run with a two-cut programm for roughing
and finishing cuts.
All cutting parameters for speed and feed can be presetted steplessly
on the control Panel, Partially controlled on a digital display. Also
Error indicator as digital numbers.
The travel of the hobbing slide and the workpiece slide is adjustable
and controlled by A 4-stroke camrail and stopdogs.
Hydraulic tailstock centre on left and the workpiece head on the right
side with a mounted clamping device with center and face drivers,
Differential gear drive for helical gears approx.50 Change Gears for
indexing and helix
Built-on coolant equipment, separate hydraulic aggregate, machine light
and safety glass in front of working area
Condition : Good to very good Machine can be inspected under power.
Low working hours after reconditioning
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.