CONTROLS
PLC SIEMENS S7
PRESS DESIGN
drive system: knuckle-joint
frame design: H-frame, monoblock
openings in uprights: yes
feedstock transport direction: left to right
PRESS FORCES
total force (nominal): 315 to
nominal work capacity: 38 kNm
PRESS TABLE
table surface (left-right): 2000 mm
table surface (front-back): 1200 mm
SLIDE
slide force: 315 to
table surface (left-right): 1995 mm
table surface (front-back): 1100 mm
stroke: 160 mm
stroke rate (max.): 100 /min
SLIDE (MECHAN. PRESS)
slide adjustment: 140 mm
stroke rate (min.): 20 /min
stroke rate (max.): 100 /min
TOOL ASSEMBLY DIMENSIONS
shut height (stroke down, adjustment up), BDC: 555 mm
distance between columns (H-frame): 2060 mm
passline opening (free passage in side columns): 1060 mm
OVERALL SPECIFICATIONS (COIL LINES)
sheet width max.: 400 mm
sheet thickness max.: 5 mm
COIL CHAIR
coil weight max.: 4 to
DECOILER
design: single reel, traversable
sheet width max.: 400 mm
coil weight max.: 4 to
max. diameter of coil: 1500 mm
mandrel expansion range up to: 500 mm
LEVELLER UNIT
sheet width max.: 400 mm
sheet width (min): 50 mm
number of leveller rolls: 9
diameter of leveller rolls: 50 mm
STRIP-FEEDER
feeder type: roll feeder
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
total weight approx.: 45000 kg
ATTACHMENTS (PRESSES)
decoiler: yes
leveller unit: yes
strip feeder: yes
Coil Reel KOHLER 4000.1
Straightener KOHLER KRM 50.400/9
Loop control
HIESSL belt lubrication (wide spray)
UNIDOR control system
Tool loading consoles
Sold 
