Machine type: | Differential press |
Manufacturer: | BRUDERER LEINHAAS |
Year of manifacturing: | 1995 |
Type: | NDWP.4AP11-2400 |
Condition: | used |
Attended time: | h |
Number of reference: | p180013 |
Press forces | ||
---|---|---|
total force (nominal): | 240 | to |
Press Table | ||
---|---|---|
table surface (left-right): | 1100 | mm |
table surface (front-back): | 700 | mm |
height above floor level: | 800 | mm |
Slide | ||
---|---|---|
table surface (left-right): | 700 | mm |
table surface (front-back): | 400 | mm |
slide (mechan. Press) | ||
---|---|---|
stroke min.: | 3 | mm |
stroke max.: | 120 | mm |
stroke rate (max.): | 70 | /min |
Tool Assembly Dimensions | ||
---|---|---|
shut height (stroke down, adjustment up), BDC: | 400 | mm |
Overall Specifications (coil lines) | ||
---|---|---|
sheet width max: | 325 | mm |
sheet thickness max: | 45 | mm |
max. weight of coil: | 2.5 | to |
feedstock transport direction: left to right |
Decoiler | ||
---|---|---|
design: single reel | ||
sheet width max: | 300 | mm |
max. weight of coil: | 2.5 | to |
max. diameter of coil: | 1400 | mm |
mandrel expansion range from: | 370 | mm |
mandrel expansion range up to: | 450 | mm |
Leveller Unit | ||
---|---|---|
sheet width max: | 325 | mm |
sheet width (min): | 30 | mm |
sheet thickness max: | 45 | mm |
sheet thickness (min): | 4 | mm |
number of leveller rolls: | 13 | |
diameter of leveller rolls: | 60 | mm |
number of infeed-/outfeed rolls: | 2 | |
diameter of feed rolls: | 100 | mm |
feed velocity min.: | 5 | m/min |
feed velocity max.: | 30 | m/min |
drive power: | 15 | kW |
Strip-Feeder | ||
---|---|---|
feeder type: roll feeder | ||
sheet width max: | 310 | mm |
sheet thickness max: | 6 | mm |
speed (max): | 110 | m/min |
Electrical specifications | ||
---|---|---|
total power consumption: | 67 | kW |
Dimensions / weights | ||
---|---|---|
space requirements -left/right-: | 2000 | mm |
space requirements -front/back-: | 1800 | mm |
total height: | 4000 | mm |
total weight approx.: | 18000 | kg |