| Make | DMG MORI |
| Type of machine | DMF 180-7 |
| Year of manufacture | 2018 |
| Control system | 840 D sl op. ( CELOS ) Siemens |
| Tool holder | HSK-A63 |
| Torque on the spindle | 130 / 86 Nm |
| x-travel | 1.800 mm |
| y-travel | 700 mm |
| z-travel | 700 mm |
| Table area | 2.100 x 700 mm |
| max. Table load | 500 kg |
| Total power requirement | 73 kVA |
| Speed range | 16 1/min |
| Control | CNC |
| Machine's weight | 13,7 t |
| Chip removal device |  |
| Cooling system | |
| Tool diameter | 80 mm |
| Tool weight | 6,0 kg |
| Overall dimensions | 7,5 x 6,5 x 3,0 m |
| Feed speed | max. 40.000 mm/min |
| Tool length | 300 mm |
| T-slot - distance | 63 mm |
| Table diameter | 750 mm |
| Table height | 255 mm |
| Handwheel, electronic | |
| Internal coolant supply | |
| High-pressure coolant | 40/80 bar |
| Number of T-slots | 7 |
| Main spindle speed range | 20 - 20.000 min/-1 |
| Enclosed cabin | |
| Acceleration | 4 m/s² |
| Paper belt filter | |
| Main spindle power | 35 / 25 kW |
| Documents | |
| 3D Measuring probe | DMG MORI - PP 60 opt. |
| Oil mist separator | |
| Delivery period | nach Absprache |
| Tool position determination | BLUM Laser |
| tilt +/- | B: +/- 100 ° |
| Number of tool slots | 60 pos. |
| Price |
Auf Anfrage |
| |
| |
| |
| Resolution | 0,001 ° |
Maschinenart: Fahrständerfräsmaschine
Hauptspindel::
Arbeitstisch::
NC-Rundtisch::
drehbar: C: 360 °
Werkzeugmagazin::
max. Werkzeugdurch. bei freier Nachbarbox.: 130 mm
Wechselzeit Span - Span: 7,6 sec
Vorschübe::
Eilgang ( X / Y / Z ): 40 m/min
Vorschubkraft ( X / Y / Z ): 8 kN
direktes Meßsystem:
Rotationssichtscheibe: 2x
Spülpistole:
5-Achsen CNC - Fahrständerfräsmaschine
DMG MORI - DMF 180-7
- Motorspindel SpeedMaster
- Schwenkfräskopf (B-Achse)
- Rundtisch integriert in Starrtisch
- innere Kühlmittelzufuhr
- Spindel, Y-Achse und Klemmung B-Achse überholt in 04/2025
