CONTROLS
PLC SIEMENS S5
PRESS DESIGN
drive system: eccentric / crank
frame design: H-frame, monoblock
openings in uprights: yes
number of suspensions: 2
number of slide actions: 1
table cushion: yes
quick die change system: yes
feedstock transport direction: left to right
PRESS FORCES
total force (nominal): 400 to
nominal work capacity: 32 kNm
PRESS TABLE
table surface (left-right): 2600 mm
table surface (front-back): 990 mm
thickness of bolster plate: 200 mm
height above floor level: 800 mm
opening in bed (left-right): 2250 mm
opening in bed (front-back): 280 mm
SLIDE
slide force: 400 to
table surface (left-right): 2600 mm
table surface (front-back): 990 mm
stroke: 210 mm
stroke rate (max.): 90 /min
SLIDE (MECHAN. PRESS)
slide adjustment: 150 mm
stroke rate (min.): 25 /min
stroke rate (max.): 90 /min
hydraulic overload protection: yes
main drive power: 72 kW
SLIDE EJECTOR / CUSHION
number of ejectors: 13
nominal force: 3.7 to
stroke: 89 mm
TOOL ASSEMBLY DIMENSIONS
shut height (stroke down, adjustment up), BDC: 705 mm
distance between columns (H-frame): 2900 mm
passline opening (free passage in side columns): 900 mm
free passage between side columns (height): 545 mm
COIL CHAIR
max. weight of coil: 3 to
stroke: 550 mm
DECOILER
design: single reel, traversable
sheet width max: 400 mm
sheet width (min): 30 mm
max. weight of coil: 3 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
LEVELLER UNIT
sheet width max: 400 mm
sheet thickness max: 5 mm
sheet thickness (min): 0.5 mm
number of leveller rolls: 9
diameter of leveller rolls: 50 mm
number of infeed-/outfeed rolls: 2
diameter of feed rolls: 150 mm
loop controls: yes
STRIP-FEEDER
feeder type: roll feeder
roll diameter: 120 mm
pilot release system: yes
TRANSFER SYSTEM
distance between tools, stroke X max.: 300 mm
distance between tools, stroke X min.: 90 mm
Inner width clamping rails closed max.: 340 mm
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
height above floor level: 6300 mm
total weight approx.: 73000 kg
Coil line KOHLER
Zig-zag feed
2-axis transfer unit
Press force monitoring BRANKAMP
cushion mounting bar in table with exchangeable pneumatic cushion units
MAYFRAN scrap conveyor (cross conveyor)
optional (separate offer):
MAYFRAN longitudinal conveyor and scrap loading station with swiveling outlet.
Condition:
Machine serviced annually, good overall condition.
next safety check 11/2024
