| Make | KLINGELNBERG |
| Type of machine | LKR 400 A 100 |
| Year of manufacture | 1974 |
| Machine's weight | 42 |
| Max. Module | 1 |
| Total power requirement | 12 |
| Max. diameter of gear wheel | 400 |
| Wheel width | NA |
| Min. module | 10 |
max wheel diameter: 400 mm
gear width: NA mm
max module: 1
min module: 10
total power requirement: 12 kW
weight of the machine ca: 42 t
dimensions of the machine ca: m
K L I N G E L N B E R G (Germany)
Automatic Bevel Gear Lapping Machine
Model LKR 400 A 100 Year 1974/1998 Serial No. 1890
Partially reconditioned and electrically modernized in 1998 by
Welter Company
_______________________________________________________
Max. Ø of crown gear 400 mm
Adjustment of pinion spindle 160 / 250 mm
Adjustment of crown gear spindle 115 / 265 mm
Additional movements:
Axial / distance / vertical, approx. + / - 2 mm
Automatic tooth clearance 0 - 0.6 mm
Module 1 - 10
Axial offset, up / down, each 50 mm
(= axial offset travel from middle position)
Bore hole of driving spindle 100 taper
Bore hole of driven spindle 60 taper
6 spindle speeds 900 - 1,800 rpm
Total electrical load 12 kW - 380 V - 50 Hz
Weight 4,200 kg
Accessories / Special Features
Hydraulic workpiece clamping for both spindles.
Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc.
Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism.
Separate switch cabinet. Separate hydraulic unit, etc.
Price, ex stock EUR 29,500.--
The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.
