| Make | VDF-BOEHRINGER |
| Type of machine | DUS 560 |
| Year of manufacture | 1998 |
| Control system | SIEMENS Model 805 |
| Machine's weight | 4000 |
| Total power requirement | 25 |
| Cutting diameter | 570 |
| Turning length | 1250 |
| Overall dimensions |  |
turning diameter: 570 mm
turning length: 1250 mm
control: SIEMENS Model 805
total power requirement: 25 kW
weight of the machine ca: 4000 kg
dimensions of the machine ca: m
V D F - BOEHRINGER (Germany)
Universal Teach-In Lathe with SIEMENS Cycle Control
Model DUS 560
Year 1998 / fully reconditioned in 2008 /N 1022.3421-03
________________________________________________________
Height of centres 280 mm
Max. swing Ø over guideways 570 mm
Max. swing Ø over carriage/crossslide 365 mm
Distance between centres 1.250 mm
Spindle bore 62 mm
Travel of face slide / upper slide 345 / 125 mm
Spindle speeds, 2 steps, infinitely variable 3-500 / 15 – 2.500 rpm
Longitudinal and facing feeds, infinitely variable 0.01 – 50 mm/rev
Quick feeds, longitudinal / cross 5 / 10 m/min
Feed capacity carriage, longitudinal, max. 6,5 resp.12,5 kN
Max. weight of workpiece in chuck / between centres 400/1.000 kg
Thread leads 0.1 – 400 mm
Spindle drive 415/21 kW
Total electrical load 25 kW - 400 V - 50 Hz
Total Weight, approx. 4.000 kg
Accessories / Special Features
SIEMENS Cycle Control, Model 805 Manual Turn for 2 axes.
Direct input of all turning parameters via interactive operator interface.
The appropriate software is available. Control Unit is built into a
travelling chip protection door.
Hardened and ground guideways. Spindle/Chuck stops always on same position.
The carriage and the facing slide can be actuated for quick-feed by joystick
in all 4 directions,but also with electronic handwheels for fine infeed.
The Mainspindle can be also controlled by a joystick forward and backward
directions.
Built-on MULTIFIX Tool Holder Head Model CD with 6 different tool holders,
Separate swivable toolholder bloc to hold CAPTO – Tools with internal
coolant supply and also To hold he regular MULTIFIX holders. Various CAPTO
tools ara vailable inclusive collets.
Built-on 3-Jaw-Chuck Make SCA 300 mm Ø, separate Face Plate Ø 500 mm,
4-Jaw-Chuck 310 mm Ø,
Simple face plate 500 mm, and driver plate, various sets of jaws.
Two Protection doors one for the chuck area, other one is travelling with
the carriage
Tailstock easily moved with air cushion, spindle length stop for inside
mainspindle
Mobile chippan with coolant pump and oilskimmer, separate tool cabinet,
working light, etc.
Condition : Very good, guide ways very good,
Machine can be inspected under power.
Ideal for small batch production, and / or training centre
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.
Sold 
