CONTROLS
electronic controls
PRESS DESIGN
drive system: eccentric / crank
openings in uprights: yes
feedstock transport direction: right to left
PRESS FORCES
total force (nominal): 315 to
nominal work capacity: 45 kNm
PRESS TABLE
table surface (left-right): 2250 mm
table surface (front-back): 1100 mm
thickness of bolster plate: 150 mm
height above floor level: 1000 mm
SLIDE
slide force: 315 to
table surface (left-right): 2250 mm
table surface (front-back): 880 mm
stroke: 210 mm
stroke rate (max.): 80 /min
SLIDE (MECHAN. PRESS)
slide adjustment: 120 mm
stroke rate (min.): 25 /min
stroke rate (max.): 80 /min
main drive power: 60 kW
SLIDE EJECTOR / CUSHION
working principle: pneumatical
nominal force: 1.5 to
stroke: 80 mm
TOOL ASSEMBLY DIMENSIONS
shut height (stroke down, adjustment up), BDC: 560 mm
distance between columns (H-frame): 2250 mm
passline opening (free passage in side columns): 800 mm
COIL CHAIR
max. weight of coil: 3 to
DECOILER
design: single reel, traversable
sheet width max: 400 mm
max. weight of coil: 3 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 470 mm
mandrel expansion range up to: 520 mm
LEVELLER UNIT
sheet width max: 500 mm
material cross section max. (450 N/mm2): 2000 mm²
number of leveller rolls: 9
diameter of leveller rolls: 60 mm
number of infeed-/outfeed rolls: 2
feed velocity min.: 40 m/min
loop controls: yes
STRIP-FEEDER
sheet width max: 400 mm
sheet thickness max: 5 mm
feeding step max.: 1300 mm
DIMENSIONS / WEIGHTS
height above floor level: 5000 mm
total weight approx.: 44000 kg
Transfer system SANDER
Scrap conveyor
Condition:
Stand welded
