| Производитель | DUNKES |
| Модель | HD 10 |
| Год выпуска | 1993 |
| Масса станка | 6500 |
| Максим. потребляемая мощность станка | 75 |
| Рабочий ход | 400 |
| Вылет | 0 |
| Усилие | 10 |
pressure: 10 t
throat: 0 mm
stroke: 400 mm
total power requirement: 75 kW
weight of the machine ca: 6500 t
dimensions of the machine ca: m
D U N K E S (Germany)
CNC Controlled Hydraulic Double Column Press
Model HD 10
Year 1993
________________________________________________________
Pressure 10 tons
Ram stroke 400 mm
Mounting height 600 mm
Table size 400 x 300 mm
Table height above floor 820 mm
Ram area 400 x 300 mm
Ram bore 40 mm
Quickspeed, downwards, max. 70 mm/s
Working speed, downwards, using max. pressure 40 mm/s
Working speed, min. 5 mm/s
Working speed adjustable from 5 - 70 mm/s
Return stroke speed, min./max. 20 / 175 mm/s
Drive 7.5 kW
Total electrical load, approx. 12 kW - 380 V - 50 Hz
Weight, approx. 6,500 kg
Accessories / Special Features
DUNKES CNC Control, Model 200, can be programmed with
presettable parameters, e.g. Stroke, speed, forward and
return motion, pressing time, etc.
Separate switch cabinet with floppy disk input.
Pendant control with monitor.
Two-handed release, in conjunction with pneumatic safety door.
A turning device for calibrating and smoothing of bores is
mounted on the ram. (Calibrating mandrel moves into the bore
and rotates, powered by it own motor-driven timer. Repetitions
are controlled by stroke counter.)
