PRESS DESIGN
drive system: eccentric / crank
frame design: H-frame, monoblock
openings in uprights: yes
number of suspensions: 2
opening in table: yes
feedstock transport direction: left to right
PRESS FORCES
total force (nominal): 350 to
nominal work capacity: 50 kNm
PRESS TABLE
table surface (left-right): 1550 mm
table surface (front-back): 1300 mm
thickness of bolster plate: 250 mm
opening in bed (left-right): 1300 mm
opening in bed (front-back): 350 mm
SLIDE
table surface (left-right): 1400 mm
table surface (front-back): 1100 mm
stroke: 200 mm
stroke rate (max.): 100 /min
SLIDE (MECHAN. PRESS)
slide adjustment: 150 mm
stroke min.: 20 mm
stroke max.: 200 mm
stroke rate (min.): 20 /min
stroke rate (max.): 100 /min
hydraulic overload protection: yes
main drive power: 60 kW
TOOL ASSEMBLY DIMENSIONS
shut height (stroke down, adjustment up), BDC: 700 mm
distance between columns (H-frame): 1600 mm
passline opening (free passage in side columns): 910 mm
free passage between side columns (height): 1000 mm
COIL CHAIR
coil weight max.: 3 to
stroke: 500 mm
DECOILER
design: single reel, traversable
sheet width max.: 500 mm
sheet width (min): 30 mm
coil weight max.: 3 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
LEVELLER UNIT
sheet width max.: 600 mm
sheet thickness max.: 5 mm
sheet thickness min.: 0.4 mm
diameter of leveller rolls: 9 mm
distance between leveller rolls: 30 mm
diameter of feed rolls: 120 mm
feed velocity max.: 40 m/min
loop controls: yes
STRIP-FEEDER
feeder type: roll feeder
sheet width max.: 500 mm
sheet thickness max.: 5 mm
feeding step max.: 999.9 mm
pilot release system: yes
TRANSFER SYSTEM
distance between tools, stroke X max.: 260 mm
distance between tools, stroke X min.: 60 mm
Inner width clamping rails closed max.: 455 mm
Inner width clamping rails closed min.: 205 mm
DIMENSIONS / WEIGHTS
space requirements -left/right-: 3800 mm
space requirements -front/back-: 2800 mm
total height: 4500 mm
total weight approx.: 40000 kg
Decoiler, traversing KOHLER 160/600
Straightener KOHLER 30 600/9-3000.1
Servo feed WVE 160/600
2-axis transfer system SANDER, infinitely variable
28.02.2024 press damaged, connection slide/connecting rod defective
