PRESS DESIGN
drive system: eccentric / crank
frame design: H-frame, tie rod
openings in uprights: yes
table cushion: yes
feedstock transport direction: left to right
PRESS FORCES
total force (nominal): 200 to
PRESS TABLE
table surface (left-right): 1780 mm
table surface (front-back): 1300 mm
opening in bed (left-right): 1445 mm
opening in bed (front-back): 260 mm
SLIDE
slide force: 200 to
table surface (left-right): 1500 mm
table surface (front-back): 1100 mm
stroke: 178 mm
stroke rate (max.): 120 /min
SLIDE (MECHAN. PRESS)
slide adjustment: 150 mm
stroke rate (min.): 20 /min
stroke rate (max.): 120 /min
DIE CUSHION (TABLE CUSHION)
number of cushions: 11
cushion force: 3 to
TOOL ASSEMBLY DIMENSIONS
shut height (stroke down, adjustment up), BDC: 542 mm
DECOILER
design: twin reel
sheet width max: 260 mm
max. weight of coil: 2 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
LEVELLER UNIT
sheet width max: 250 mm
sheet thickness max: 2 mm
sheet thickness (min): 0.3 mm
number of leveller rolls: 19
diameter of leveller rolls: 18 mm
feed velocity min.: 5 m/min
feed velocity max.: 60 m/min
loop controls: yes
STRIP-FEEDER
feeder type: roll feeder
sheet width max: 250 mm
TRANSFER SYSTEM
distance between tools, stroke X max.: 260 mm
distance between tools, stroke X min.: 60 mm
stroke Y fix: 55 mm
Inner width clamping rails closed max.: 455 mm
Inner width clamping rails closed min.: 205 mm
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
mains frequency: 50 Hz
ATTACHMENTS (PRESSES)
decoiler: yes
leveller unit: yes
strip feeder: yes
gripper transfer system: yes
+ Coil feed line KOHLER with straightener KRE2 18.260/19
+ Feeder KAISER KWV 250
+ 2-axis gripper bars transfer SANDER with adjustable pitch
+ table cushion rail with various cushions and fillers (separate data sheet available)
