OVERALL SPECIFICATIONS (COIL LINES)
sheet width max.: 400 mm
sheet thickness max.: 5 mm
coil weight max.: 3 to
feedstock transport direction: left to right
COIL CHAIR
coil weight max.: 3 to
stroke: 550 mm
DECOILER
sheet width max.: 400 mm
sheet width (min): 30 mm
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
LEVELLER UNIT
sheet thickness max.: 5 mm
sheet thickness min.: 0.5 mm
number of leveller rolls: 9
diameter of leveller rolls: 50 mm
diameter of feed rolls: 150 mm
STRIP-FEEDER
feeder type: roll feeder
roll diameter: 120 mm
pilot release system: yes
ELECTRICAL SPECIFICATIONS
mains voltage: 400 V
mains frequency: 50 Hz
Coil line consisting of
+ 180° rotating coil loading chair
+ Single reel type 4000.1 with transverse travelling device
+ Insertion aids, pressure roller, hold-down roller, strip insertion wedge, strip side guide
+ 9-roller leveller type 50.400/9
+ belt transfer table
+ Loop control
+ 2-roll feed zig-zag WVE 160.400
Maximum strip cross-section 1000 mm2
at tensile strength 550 N/mm2
at max. yield strength 350 N/mm2
