Пресс для чистовой вырубки FEINTOOL HFA 8000, г.в. 1980

PRESS DESIGN
  drive system: hydraulic
  feedstock transport direction: left to right

SLIDE
  total force (nominal): 800 to
  stroke: 200 mm

SLIDE (HYDR. PRESS)
  approximation velocity max.: 120 mm/s
  working velocity min.: 3 mm/s
  working velocity max.: 24 mm/s
  return velocity max.: 135 mm/s

COUNTER RAM
  nominal force: 200 to
  stroke: 40 mm

V-RING
  nominal force: 400 to
  stroke: 40 mm

TOOL DIMENSIONS
  lower table (left-right): 1000 mm
  lower table (front-back): 1200 mm
  upper table (left-right): 1000 mm
  upper table (front-back): 1000 mm
  shut height max.: 450 mm
  ram adjustment: 100 mm

OVERALL SPECIFICATIONS (COIL LINES)
  sheet width max: 400 mm
  sheet thickness max: 5 mm
  max. weight of coil: 5 to
  feedstock transport direction: left to right

COIL CHAIR
  max. weight of coil: 5 to

DECOILER
  design: single reel
  sheet width max: 400 mm
  sheet width (min): 80 mm
  max. weight of coil: 5 to
  mandrel expansion range from: 460 mm
  mandrel expansion range up to: 530 mm

LEVELLER UNIT
  sheet width max: 400 mm
  sheet thickness max: 7.3 mm
  sheet thickness (min): 0.11 mm
  material cross section max. (450 N/mm2): 1700 mm²
  number of leveller rolls: 9
  diameter of leveller rolls: 50 mm
  diameter of intermediate rolls: 150 mm
  feed velocity min.: 5 m/min
  feed velocity max.: 40 m/min
  loop controls: yes

STRIP-FEEDER
  feeder type: roll feeder
  sheet width max: 450 mm
  sheet thickness max: 14 mm
  speed (max): 48 m/min

CROP SHEAR
  cutting force: 580 kN

ELECTRICAL SPECIFICATIONS
  total power consumption: 135 kW
  mains voltage: 380 V
  mains frequency: 50 Hz

ATTACHMENTS -FINEBLANKING PRESS-
  decoiler: yes
  leveller unit: yes