Штамповочный автомат SCHULER GRÄBENER GMO 2-315-2000-160, г.в. 2003

CONTROLS
  PLC SIEMENS S7

PRESS DESIGN
  drive system: knuckle-joint
  frame design: H-frame, monoblock
  openings in uprights: yes
  feedstock transport direction: left to right

PRESS FORCES
  total force (nominal): 315 to
  nominal work capacity: 38 kNm

PRESS TABLE
  table surface (left-right): 2000 mm
  table surface (front-back): 1200 mm

SLIDE
  slide force: 315 to
  table surface (left-right): 1995 mm
  table surface (front-back): 1100 mm
  stroke: 160 mm
  stroke rate (max.): 100 /min

SLIDE (MECHAN. PRESS)
  slide adjustment: 140 mm
  stroke rate (min.): 20 /min
  stroke rate (max.): 100 /min

TOOL ASSEMBLY DIMENSIONS
  shut height (stroke down, adjustment up), BDC: 555 mm
  distance between columns (H-frame): 2060 mm
  passline opening (free passage in side columns): 1060 mm

OVERALL SPECIFICATIONS (COIL LINES)
  sheet width max.: 400 mm
  sheet thickness max.: 5 mm

COIL CHAIR
  coil weight max.: 4 to

DECOILER
  design: single reel, traversable
  sheet width max.: 400 mm
  coil weight max.: 4 to
  max. diameter of coil: 1500 mm
  mandrel expansion range up to: 500 mm

LEVELLER UNIT
  sheet width max.: 400 mm
  sheet width (min): 50 mm
  number of leveller rolls: 9
  diameter of leveller rolls: 50 mm

STRIP-FEEDER
  feeder type: roll feeder

ELECTRICAL SPECIFICATIONS
  mains voltage: 400 V
  mains frequency: 50 Hz

DIMENSIONS / WEIGHTS
  total weight approx.: 45000 kg

ATTACHMENTS (PRESSES)
  decoiler: yes
  leveller unit: yes
  strip feeder: yes


Coil Reel KOHLER 4000.1
Straightener KOHLER KRM 50.400/9
Loop control
HIESSL belt lubrication (wide spray)
UNIDOR control system
Tool loading consoles