برنامج

برنامج

برنامج

برنامج

آلة خراطة - بتحكم دوري

- سنة التصنيع:
- Fabrikneu
- التحكم Siemens 828D basic | تركيب المغزل ISO D8 | قطر الدوران 500 mm | التحكم CNC (Siemens 828D) |
برنامج

برنامج

برنامج

مروحة

- سنة التصنيع:
- nicht bekannt
- التحكم konventionell |
برنامج

برنامج

آلة خراطة دوارة - قائم مزدوج

- سنة التصنيع:
- 2009
- قطر الدوران 4250 mm | التحكم Siemens Sinumerik 850D | قطر الطاولة 4000 mm |
مركز تصنيع - أفقي

- سنة التصنيع:
- 2001
مركز تصنيع - أفقي

- سنة التصنيع:
- 2003
آلة خراطة دوارة - قائم فردي

- سنة التصنيع:
- 2019
- التحكم SIEMENS 840D | نطاق السرعة 3.333 min/-1 | التحكم CNC | نقل الرقائق x | جهاز تبريد x | قطر القرص المستوي 1.600 mm | عدد الأدوات في المخزن 24 pos. | إمدادات التبريد الداخلية x |
مركز تصنيع - أفقي

- سنة التصنيع:
- 1996
- التحكم Siemens | مسار x 600 mm | مسار y 560 mm | مسار z 560 mm | أقصى حمولة للطاولة 300 kg | تركيب المغزل ISO 40 | التحكم CNC |
آلة خراطة CNC - سرير مائل

- سنة التصنيع:
- 1978
- التحكم Siemens 810 T | قطر الدوران 580 mm | التحكم CNC | طول التدوير 1600 mm | نقل الرقائق x | داعم x |
آلة خراطة CNC

- سنة التصنيع:
- 1998
- التحكم SIEMENS SINUMERIC 840 C | قطر الدوران 200 | طول التدوير 400 |
آخر

- سنة التصنيع:
- unbekannt
- التحكم konventionell |
آخر

- سنة التصنيع:
- unbekannt
- التحكم konventionell |
آلة خراطة ثقيلة

- سنة التصنيع:
- 2006
- التحكم Siemens 828D | مغزل قطع الحفر 152 mm |
آلة صنفرة داخلية

- سنة التصنيع:
- 2002
- التحكم Siemens 840 D |
مركز المعالجة العمودي

- سنة التصنيع:
- 2007
- التحكم SIEMENS 840D SHOPMILL | مسار x 1000 mm | مسار y 700 mm | مسار z 550 mm | أقصى حمولة للطاولة 1.5 t | تركيب المغزل ISO hsk 63 |
آلات الطحن

- سنة التصنيع:
- 1986
مركز تصنيع - أفقي

آلة خراطة - بتحكم دوري

الآلات المستعملة
Used machines
Used machines – a great solution for industrial companies and workshops
Operating workshops and industrial companies can be difficult nowadays because advertising costs are very high while there is no guarantee for sales and profit. One possibility that saves costs in a lawful and useful way is the purchase of used machines.
Why is the purchase of used machines beneficial?
First of all, the purchasing price of used machines is much lower. Older machines have less or even no electronic parts at all which makes them more interference-resistant. That means that these parts are less likely to be broken or in bad conditions. They do not have to be repaired or replaced so often.
Other benefit is the fact that used machines do not require power and ensure maximum freedom for installation. Older and used machines are extremely tough and resistant. They have very modest demands for the conditions of use or the area. Used machines guarantee that the processing is high in quality. They usually last longer than new machines and cut costs for the operating company.
Overview of benefits that used machines have:
- Lower prices
- Used machines can be easily adapted
- They do not have any special requirements for the given space
- Lower electricity- and maintenance costs
- Higher resistance to interference
- Longer service life
The most secure way to buy used machines
A reliable online shop is the safest and best place for the purchase of used machines. The customer has access to the online shop all the time. It is less hectic and the customer is not put under pressure: He is quietly able to sit back and consider how and where to make uselful investments. Furthermore, there are always different photos given that demonstrate the current state of the machine that makes the estimation of the usability a lot easier. Plus, the potential buyer receives a decription of the products with information about the age, condition and manufacturers. The probability is zero that there will possibly be a wrong decision. Purchasing products in an online shop is more than worthwhile maily because of the favourable prices.
Overview of benefits that an online purchase has:
- The purchase can be made anytime
- It´s flexible and not stressful at all
- Photos and descriptions reduce the probability of a wrong decision
- Lower prices than in usual shops