Станки и оборудование бу из Германии

Поставка оборудования из Европы под заказ

Cookies помогают нам в предоставлении наших услуг. Пользуясь нашими сервисами, вы соглашаетесь с тем, что мы используем файлы cookie.


от до


Сброс

OKUMA - Buy used machinery


CNC Turning Machine - Inclined Bed Type

 CNC Turning Machine - Inclined Bed Type OKUMA LB 300 фото на Industry-Pilot
CNC Turning Machine - Inclined Bed Type
Control system OSP U 100 L | Cutting diameter 530 mm | Control CNC | Turning length 530 mm | Spindle opening 62 mm |
Год выпуска 2000
  • Год выпуска:
  • 2000
  • Control system OSP U 100 L | Cutting diameter 530 mm | Control CNC | Turning length 530 mm | Spindle opening 62 mm |

CNC Turning Machine

 CNC Turning Machine OKUMA LB 200 MW фото на Industry-Pilot
CNC Turning Machine
Control system OSP - U 100L | Tool holder VDI 30 | Center height 160 mm | Max. workpiece weight 200 kg | Control CNC | Turning length 320 mm | Tool turret - slots 12 | Spindle opening 60 mm |
Год выпуска 2002
  • Год выпуска:
  • 2002
  • Control system OSP - U 100L | Tool holder VDI 30 | Center height 160 mm | Max. workpiece weight 200 kg | Control CNC | Turning length 320 mm | Tool turret - slots 12 | Spindle opening 60 mm |

Machining Center - Vertical

 Machining Center - Vertical Okuma & Howa Millac 5VA фото на Industry-Pilot
Machining Center - Vertical
Control system Fanuc 15 M | Tool holder BT 50 | x-travel 1050 mm | y-travel 560 mm | z-travel 560 mm | Speed range 2 Stufen: 30-4000 1/min | max. Table load 1500 kg | Table dimensions 1600x600 mm | Number of tools in the magazine 24 Pl |
Год выпуска 1989
  • Год выпуска:
  • 1989
  • Control system Fanuc 15 M | Tool holder BT 50 | x-travel 1050 mm | y-travel 560 mm | z-travel 560 mm | Speed range 2 Stufen: 30-4000 1/min | max. Table load 1500 kg | Table dimensions 1600x600 mm | Number of tools in the magazine 24 Pl |

Machining Center - Vertical

 Machining Center - Vertical OKUMA MB-56VA фото на Industry-Pilot
Machining Center - Vertical
Control system OSP-E100M-H | x-travel 1050 mm | y-travel 560 mm | z-travel 460 mm | Operational weight 7300 Kg | Table dimensions 1300 x 560 mm |
Год выпуска 2005
  • Год выпуска:
  • 2005
  • Control system OSP-E100M-H | x-travel 1050 mm | y-travel 560 mm | z-travel 460 mm | Operational weight 7300 Kg | Table dimensions 1300 x 560 mm |

CNC Turning and Milling Machine

 CNC Turning and Milling Machine OKUMA LC10 фото на Industry-Pilot
CNC Turning and Milling Machine
Control system OSPL 50001 | Control konventionell |
Год выпуска 1990
  • Год выпуска:
  • 1990
  • Control system OSPL 50001 | Control konventionell |

CNC Turning Machine

 CNC Turning Machine Okuma Corporation LFS 10 – 2SP фото на Industry-Pilot
Control system OKUMAOSP 700L | x-travel 130 mm | z-travel 145 mm | Cutting diameter 400 mm | Turning length 80 mm | Spindle opening 53 mm |
Год выпуска 2001
  • Год выпуска:
  • 2001
  • Control system OKUMAOSP 700L | x-travel 130 mm | z-travel 145 mm | Cutting diameter 400 mm | Turning length 80 mm | Spindle opening 53 mm |

CNC Turning Machine

 CNC Turning Machine Okuma Corporation LB 15 фото на Industry-Pilot
CNC Turning Machine
Control system OKUMA | Cutting diameter 250 mm | Turning length 500 mm | Spindle opening 56 mm |
Год выпуска 1989
  • Год выпуска:
  • 1989
  • Control system OKUMA | Cutting diameter 250 mm | Turning length 500 mm | Spindle opening 56 mm |

CNC Turning Machine

 CNC Turning Machine Okuma Corporation LB-250 T фото на Industry-Pilot
CNC Turning Machine
Control system OKUMAOSP-U100L | x-travel 180 mm | z-travel 325 mm | Cutting diameter 300 mm | Driven tool 12 (0) | Turning length 325 mm | Spindle opening 62 mm |
Год выпуска 2001
  • Год выпуска:
  • 2001
  • Control system OKUMAOSP-U100L | x-travel 180 mm | z-travel 325 mm | Cutting diameter 300 mm | Driven tool 12 (0) | Turning length 325 mm | Spindle opening 62 mm |

Machining Center - Vertical

 Machining Center - Vertical Okuma Corporation MB 56-VA фото на Industry-Pilot
Machining Center - Vertical
Control system OKUMA | x-travel 1050 mm | y-travel 560 mm | z-travel 460 mm | Internal coolant supply ja |
Год выпуска 2008
  • Год выпуска:
  • 2008
  • Control system OKUMA | x-travel 1050 mm | y-travel 560 mm | z-travel 460 mm | Internal coolant supply ja |

Machining Center - Horizontal

 Machining Center - Horizontal Okuma Corporation MX 60HB фото на Industry-Pilot
Machining Center - Horizontal
Control system OKUMAOSP 7000M | x-travel 1000 mm | y-travel 750 mm | z-travel 1000 mm | Internal coolant supply ja |
Год выпуска 1998
  • Год выпуска:
  • 1998
  • Control system OKUMAOSP 7000M | x-travel 1000 mm | y-travel 750 mm | z-travel 1000 mm | Internal coolant supply ja |

Machining Center - Vertical

 Machining Center - Vertical Okuma Corporation MB-46 VAE фото на Industry-Pilot
Machining Center - Vertical
Control system OKUMA | x-travel 762 mm | y-travel 460 mm | z-travel 450 mm | Internal coolant supply ja |
Год выпуска 2006
  • Год выпуска:
  • 2006
  • Control system OKUMA | x-travel 762 mm | y-travel 460 mm | z-travel 450 mm | Internal coolant supply ja |

Machining Center - Horizontal

 Machining Center - Horizontal Okuma Corporation MA-600HB фото на Industry-Pilot
Machining Center - Horizontal
Control system OKUMAOSP P200M | x-travel 1000 mm | y-travel 900 mm | z-travel 1000 mm | Internal coolant supply ja |
Год выпуска 2008
  • Год выпуска:
  • 2008
  • Control system OKUMAOSP P200M | x-travel 1000 mm | y-travel 900 mm | z-travel 1000 mm | Internal coolant supply ja |

Machining Center - Horizontal

 Machining Center - Horizontal OKUMA MC 800 H фото на Industry-Pilot
Machining Center - Horizontal
spindel speed 10 - 4500 min-1 | x-travel 1250 mm | y-travel 1000 mm | z-travel 850 mm | Control CNC |
Год выпуска 1996
  • Год выпуска:
  • 1996
  • spindel speed 10 - 4500 min-1 | x-travel 1250 mm | y-travel 1000 mm | z-travel 850 mm | Control CNC |

CNC Turning Machine

 CNC Turning Machine OKUMA LB300 Space Turn фото на Industry-Pilot
CNC Turning Machine
Cutting diameter 530 mm | Control CNC | Tailstock x | Spindle opening 62 mm |
Год выпуска 1999
  • Год выпуска:
  • 1999
  • Cutting diameter 530 mm | Control CNC | Tailstock x | Spindle opening 62 mm |

CNC Turning and Milling Machine

 CNC Turning and Milling Machine OKUMA MAC TURN 30 W фото на Industry-Pilot
CNC Turning and Milling Machine
Control system - | spindel speed : 3.800 U/min | Cutting diameter 550 mm | Control CNC | Turning length : 1.500 mm | Spindle opening 80 mm |
Год выпуска 2000
  • Год выпуска:
  • 2000
  • Control system - | spindel speed : 3.800 U/min | Cutting diameter 550 mm | Control CNC | Turning length : 1.500 mm | Spindle opening 80 mm |

CNC Turning Machine

 CNC Turning Machine OKUMA LB-35 II MC-2000 фото на Industry-Pilot
CNC Turning Machine
Control system OSP 7000L | Cutting diameter mm | Control CNC | Turning length 2000 mm | Chip removal device Mayfran | Spindle operating time 13.000 | Tailstock programmierbar | C-axis x |
Год выпуска 1998
  • Год выпуска:
  • 1998
  • Control system OSP 7000L | Cutting diameter mm | Control CNC | Turning length 2000 mm | Chip removal device Mayfran | Spindle operating time 13.000 | Tailstock programmierbar | C-axis x |

Screw-cutting lathe

 Screw-cutting lathe Okuma LS фото на Industry-Pilot
Screw-cutting lathe
Speed range 35-1800 U/min | Center height 240 mm | Control konventionell | Turning length 1350 mm |
Год выпуска ca. 1975
  • Год выпуска:
  • ca. 1975
  • Speed range 35-1800 U/min | Center height 240 mm | Control konventionell | Turning length 1350 mm |

Center Lathe

 Center Lathe Okuma LU 15 M Big Bore фото на Industry-Pilot
Control system OSP 7000 L | Driven tool upper turret | Turning length 250 mm |
Год выпуска 1997
  • Год выпуска:
  • 1997
  • Control system OSP 7000 L | Driven tool upper turret | Turning length 250 mm |

Center Lathe

 Center Lathe Okuma LU 15 M фото на Industry-Pilot
Center Lathe
Control system OSP 5020 L | Driven tool upper turret | Turning length 350 mm |
Год выпуска 1994
  • Год выпуска:
  • 1994
  • Control system OSP 5020 L | Driven tool upper turret | Turning length 350 mm |

Vertical Turning Machine

 Vertical Turning Machine OKUMA VTM 1200 YB фото на Industry-Pilot
Vertical Turning Machine
Control system OSP-P300S | Tool holder BT 50 Big Plus | Speed range 40 - 5.000 min/-1 | Cutting diameter 1.200 mm | Control CNC | Chuck size max. 1.250 mm | C-axis 360 ° | Spindle opening 160 mm |
Год выпуска 2014
  • Год выпуска:
  • 2014
  • Control system OSP-P300S | Tool holder BT 50 Big Plus | Speed range 40 - 5.000 min/-1 | Cutting diameter 1.200 mm | Control CNC | Chuck size max. 1.250 mm | C-axis 360 ° | Spindle opening 160 mm |

CNC Turning and Milling Machine

 CNC Turning and Milling Machine OKUMA MacTurn 30 фото на Industry-Pilot
CNC Turning and Milling Machine
Control system OSP U100L | Tool holder MAS BT 40 | Cutting diameter max. 500 mm | Control CNC | Turning length max. 1.000 mm | Chip removal device x | Tailstock x | C-axis 0,001 ° |
Год выпуска 1999
  • Год выпуска:
  • 1999
  • Control system OSP U100L | Tool holder MAS BT 40 | Cutting diameter max. 500 mm | Control CNC | Turning length max. 1.000 mm | Chip removal device x | Tailstock x | C-axis 0,001 ° |

Machining Center - Vertical

 Machining Center - Vertical OKUMA MB 46 VAE фото на Industry-Pilot
Machining Center - Vertical
Control system OSP P 200 M | Tool holder SK 40 | x-travel 762 mm | y-travel 460 mm | z-travel 460 mm | Control CNC | Chip removal device x | Internal coolant supply Interface ! |
Год выпуска 2006
  • Год выпуска:
  • 2006
  • Control system OSP P 200 M | Tool holder SK 40 | x-travel 762 mm | y-travel 460 mm | z-travel 460 mm | Control CNC | Chip removal device x | Internal coolant supply Interface ! |

CNC Turning Machine - Inclined Bed Type

 CNC Turning Machine - Inclined Bed Type OKUMA LB 25 фото на Industry-Pilot
CNC Turning Machine - Inclined Bed Type
Control system OSP5000L-G CNC | Cutting diameter 560 mm | Control CNC | Turning length 1250 mm | Tailstock x | Diameter 315 mm |
Год выпуска
  • Год выпуска:
  • Control system OSP5000L-G CNC | Cutting diameter 560 mm | Control CNC | Turning length 1250 mm | Tailstock x | Diameter 315 mm |

CNC Turning Machine

 CNC Turning Machine OKUMA LC 30 1 фото на Industry-Pilot
CNC Turning Machine
Control system OSP 5000L-G | Cutting diameter 400 mm | Control CNC | Turning length 730 mm |
Год выпуска 1988
  • Год выпуска:
  • 1988
  • Control system OSP 5000L-G | Cutting diameter 400 mm | Control CNC | Turning length 730 mm |

Turning machine - cycle control

 Turning machine - cycle control OKUMA LB 9 C фото на Industry-Pilot
Turning machine - cycle control
Operational weight 2700 kg | Cutting diameter 150 mm | Turning length 250 mm |
Год выпуска
  • Год выпуска:
  • Operational weight 2700 kg | Cutting diameter 150 mm | Turning length 250 mm |

Machining Centers

  Okuma MCR-BII фото на Industry-Pilot
Machining Centers
Control system OSP U 100 M | Tool holder SK50 BigPlus | x-travel 4000 mm | y-travel 3200 mm | z-travel 800 mm | Speed range 6000 U/min | Chip removal device ja | Number of tools in the magazine 180 | Internal coolant supply ja |
Год выпуска 2001
  • Год выпуска:
  • 2001
  • Control system OSP U 100 M | Tool holder SK50 BigPlus | x-travel 4000 mm | y-travel 3200 mm | z-travel 800 mm | Speed range 6000 U/min | Chip removal device ja | Number of tools in the magazine 180 | Internal coolant supply ja |

Vertical Turret Lathe - Single Column

 Vertical Turret Lathe - Single Column OKUMA VTM 200 фото на Industry-Pilot
Vertical Turret Lathe - Single Column
Control system OSP-P200L | Max. workpiece weight 7000 kg | Control CNC | Chuck size 2000 mm |
Год выпуска 2007
  • Год выпуска:
  • 2007
  • Control system OSP-P200L | Max. workpiece weight 7000 kg | Control CNC | Chuck size 2000 mm |

CNC Turning Machine

 CNC Turning Machine OKUMA LU 15 фото на Industry-Pilot
CNC Turning Machine
Control system x | Tool holder VDI 40 | spindel speed 45 - 4500 U/min | Cutting diameter 150 mm | Control CNC | Turning length mm | C-axis 0 |
Год выпуска 2000
  • Год выпуска:
  • 2000
  • Control system x | Tool holder VDI 40 | spindel speed 45 - 4500 U/min | Cutting diameter 150 mm | Control CNC | Turning length mm | C-axis 0 |

CNC Turning Machine - Inclined Bed Type

 CNC Turning Machine - Inclined Bed Type OKUMA LU 15 M фото на Industry-Pilot
CNC Turning Machine - Inclined Bed Type
Control system OSP 7000 L | z-travel Achse 2 KW | Cutting diameter 250 mm | Control CNC | Turning length 508 mm |
Год выпуска 1995
  • Год выпуска:
  • 1995
  • Control system OSP 7000 L | z-travel Achse 2 KW | Cutting diameter 250 mm | Control CNC | Turning length 508 mm |

CNC Turning Machine - Inclined Bed Type

 CNC Turning Machine - Inclined Bed Type OKUMA ES 66 M фото на Industry-Pilot
CNC Turning Machine - Inclined Bed Type
Control system OSP U10 L | Cutting diameter 250 mm | Control CNC | Turning length 508 mm |
Год выпуска 2007
  • Год выпуска:
  • 2007
  • Control system OSP U10 L | Cutting diameter 250 mm | Control CNC | Turning length 508 mm |

Machining Center - Vertical

 Machining Center - Vertical Okuma VR 40-2 фото на Industry-Pilot
Machining Center - Vertical
Control system : OSP 700 M | Tool holder : MAS BT 40 | x-travel 560 | y-travel 410 | z-travel 450 | Operational weight : 4 to + Palettenwechsler |
Год выпуска 1995
  • Год выпуска:
  • 1995
  • Control system : OSP 700 M | Tool holder : MAS BT 40 | x-travel 560 | y-travel 410 | z-travel 450 | Operational weight : 4 to + Palettenwechsler |

CNC Turning Machine

 CNC Turning Machine OKUMA LT 10 MY фото на Industry-Pilot
CNC Turning Machine
Control system OSP-U100L | y-travel 50/-30 mm | Operational weight 6250 Kg | Cutting diameter 210 mm | Driven tool 12 + 12 POS; 50-6000 rpm; 1,1-2,2 Kw | Counter spindle 50-4800 rpm; 5,5-7,5 Kw |
Год выпуска 2000
  • Год выпуска:
  • 2000
  • Control system OSP-U100L | y-travel 50/-30 mm | Operational weight 6250 Kg | Cutting diameter 210 mm | Driven tool 12 + 12 POS; 50-6000 rpm; 1,1-2,2 Kw | Counter spindle 50-4800 rpm; 5,5-7,5 Kw |
Поставляем бу станки, оборудование из Германии
Заказ