Горизонтально-расточной станок Fermat WFT 13 CNC 2014 Bj, г.в. 2014

Positionenanzahl im Werkzeugwechsler: 105

The machine is in good technical condition, under power, after agreement is possible to test it.
Programmable robotic tool changer Fermat Robotics 105 with magazine (105 positions) with the option of tools change in the spindle even with use of spindle sleeve with the length of 250 mm. Robotic exchange cover including sliding door in the machine working area.
Secondary control panel of the robot control system.
Direct measurement in X,Y,Z coordinates by linear optoelectronic position sensors.
Device for cooling tools by external supply of coolant units - pressure 4Bars.
Possibility of tool cooling through the spindle.
High-pressure tool cooling unit - 20Bar.
Continuous rotation of the table in the B-axis by means of two motors in the Master-Slave function (contour machining also possible in the B-axis). The position of the table is held in an automatic
position lock.
Operator screen (static) with control panel for machine control and programming.
Device for cleaning the clamping cone before insertion into the spindle.
Workpiece probe Heidenhain TS 640.
Spindle sleeve with a length of 250 mm.
Chip conveyor.
Loss lubrication oil separator.
Remote diagnostics of the machine.